The daily maintenance of the loader is very important, which is related to the safety of loading

For the daily maintenance of the loader, after each loading operation, the loading driver must clean, lubricate, tighten and maintain the equipment in time, check the equipment carefully, and deal with the faults found in the operation in time. Take corresponding measures to strengthen the maintenance of loader tires, keep the tire pressure normal, do not cause large deformation of the carcass and easy cracks in the sidewall to increase tire wear due to too low air pressure, and prevent the middle tire crown from being worn due to excessive air pressure. fetal. Eliminate overload phenomenon, avoid tire overload work, and prolong tire service life.
In view of the problem that the front wheel is more loaded and worn than the rear wheel during the loader operation, the cross transposition method is adopted, and the tires are regularly adjusted and transposed. The loader starts smoothly to avoid tire wear caused by sudden acceleration, sudden braking, and sudden steering. Carefully check the tire tread before operation to confirm whether there are any holes, remove the stones embedded in the tire in time, fill the small holes in the tread with raw rubber to prevent sand and mud from invading the cord layer and cause voids, and promptly remove sundries on the job site to prevent iron Nails, gravel, glass and other sharp objects puncture the tires to ensure safe loading.